Sodium Extra Mod Download for Minecraft 26.3 (Fabric)
Quick answer: Sodium Extra 0.9.5 is a free add-on for Sodium on Minecraft 26.3 Fabric. It does not work on its own. Install it next to Sodium and Fabric API and it unlocks a much larger set of video and detail settings inside the options menu, including animation toggles, particle controls, fog settings, and extra detail switches that Sodium itself does not expose. If you already run Sodium and wish the video menu had more switches to flip, this is the mod that adds them.
Sodium is the mod most Fabric players install first when their game stutters. It rewrites the rendering engine and, for a lot of players, it turns a choppy game into a smooth one. What Sodium does not do is give you fine control over how the game looks while it runs. Its video settings menu is deliberately small. Sodium Extra fills that gap. It sits on top of Sodium and adds the settings Sodium left out, so you can tune animations, particles, fog, clouds, and small visual details one by one.
That distinction matters, because it decides whether this mod is for you. Sodium Extra will not raise your frame rate by itself. Sodium does that work. Sodium Extra gives you control. If you already have Sodium and want to turn off rain splash particles, quiet down the water animation, or push the fog further out, Sodium Extra is the piece that makes those choices available.
Minecraft 26.3 · Fabric · v0.9.5 · Official download
What Sodium Extra does
Once Sodium Extra is installed, open Options, then Video Settings, and you will see new sections that were not there before. The mod adds pages for animations, particles, details, and fog, plus extra toggles through the existing video menu. Every switch is a simple on or off, or a slider with a small range. Nothing here asks you to edit config files by hand. You change a setting, the game applies it at once, and you can see the result without restarting.
The animation page is the one most players reach for first. Vanilla Minecraft animates a lot of things you never think about: water surfaces shimmer, lava bubbles, fire flickers, and portals swirl. Each of those animations costs a little rendering work, and on a weak laptop the total adds up. Sodium Extra lets you switch each animation off on its own. Turn off the water animation and keep the lava. Turn off portal swirls and keep everything else. You keep the look you like and drop the parts that cost frames or distract you.
The particle page works the same way. Rain, snow, splash effects, potion clouds, and block break particles all get their own toggles. Players who record videos often turn rain particles off because falling rain streaks across the screen in every outdoor shot. Players on low-end machines turn block break particles down because a mining session fills the air with debris.
Key features
- Animation toggles. Switch water, lava, fire, portal, and other animations on or off one at a time from the video settings menu.
- Particle controls. Turn rain, splash, potion, and block break particles off or down without touching the rest of the game.
- Fog control. Adjust fog start and fog distance beyond what vanilla Minecraft allows, so distant terrain stays visible longer or fades sooner, whichever you prefer.
- Extra detail settings. Toggle small visual details such as clouds, sky rendering, stars, sun and moon, and item frame rendering to suit your machine and your taste.
- Toasts and overlay options. Control recipe book toasts, advancement popups, and other screen overlays that pile up during normal play.
- Built for Sodium. Every setting plugs into Sodium’s existing video menu, so there is no second settings screen to learn and no separate config file to manage.
Compatibility: Minecraft 26.3, Fabric, and the Sodium requirement
Sodium Extra 0.9.5 is built for Minecraft 26.3. The file linked above is the Fabric build, and it needs two other mods in the mods folder to run: Sodium itself, and Fabric API. Without Sodium, Sodium Extra has nothing to extend, and the game will refuse to load it. All three files go in the same mods folder, and all three must match Minecraft 26.3.
| Item | What you need |
|---|---|
| Minecraft version | 26.3 |
| Mod loader | Fabric (this download) |
| Required: Sodium | Matching 26.3 Fabric build, installed first |
| Required: Fabric API | Matching 26.3 build |
| Other loader build | A NeoForge 0.9.5 build for 26.3 also exists on Modrinth |
| Works with Iris Shaders | Yes, it pairs with Iris Shaders and other Sodium-family mods |
Do not mix loaders. A Fabric build will not load under NeoForge, and a NeoForge build will not load under Fabric. If you run NeoForge, grab the NeoForge 0.9.5 build from the official Modrinth page instead of the Fabric file on this page. The settings inside are the same. Only the loader differs.
Sodium Extra also pairs well with the rest of the Sodium family. Sodium itself handles the rendering speed, Iris Shaders adds shader pack support on top of Sodium, and Lithium speeds up the game logic underneath. Sodium Extra is the settings layer for that stack.
How to install Sodium Extra
- Install the Fabric loader for Minecraft 26.3 from the official Fabric site, then launch the game once with the Fabric profile so the mods folder is created.
- Download Sodium for Minecraft 26.3 Fabric, Fabric API for 26.3, and Sodium Extra 0.9.5 from the button above. All three files must be for the same Minecraft version.
- Open the Minecraft launcher, click the Fabric profile, then click the folder icon to open the game directory. Open the mods folder inside it.
- Drop all three .jar files into the mods folder: Sodium, Fabric API, and sodium-extra-fabric-0.9.5+mc26.3.jar. Do not unzip any of them.
- Launch the game with the Fabric profile. On the title screen, click Mods and check that Sodium, Fabric API, and Sodium Extra all appear in the list.
- Open Options, then Video Settings. The new animation, particle, detail, and fog sections confirm Sodium Extra loaded correctly. Change one setting, such as turning off rain particles, and load a world to see it take effect.
If the Mods button does not show Sodium Extra, the usual cause is a version mismatch. Check that every file in the folder says 26.3 or mc26.3 in its name, and that you did not accidentally download the NeoForge build into a Fabric instance.
Troubleshooting
The game crashes on startup after adding Sodium Extra. This almost always means Sodium is missing or built for a different Minecraft version. Remove Sodium Extra, launch once with Sodium and Fabric API alone, and confirm the game starts. Then add the Sodium Extra file back.
The new settings do not appear in the video menu. Sodium Extra only adds its sections when Sodium loads before it. Confirm both mods show in the Mods list on the title screen. If Sodium Extra is absent from that list, the launcher loaded a different mods folder than the one you put the files in.
Shaders stopped working after installing Sodium Extra. Sodium Extra does not load shaders by itself. Shader support comes from Iris Shaders, which must be installed as a separate mod. Install the matching Iris Shaders build for 26.3 Fabric next to Sodium, and shader packs will appear in the video settings again.
Download safety
Only download Sodium Extra from its official Modrinth page at modrinth.com/mod/sodium-extra. The button on this page points straight at the official Modrinth CDN file, so clicking it starts the real download at once. Avoid repost sites that bundle mods with installers or extra software. A real mod file is a single .jar, about 482 KB for this build, and it never asks you to run an installer or enter a password. If a site asks for any of that, close it and go back to Modrinth.
Frequently asked questions
Does Sodium Extra work without Sodium?
No. Sodium Extra is an add-on, not a standalone mod. It extends Sodium’s video settings menu, so Sodium must be installed in the same mods folder. Without Sodium, the game will not load Sodium Extra at all.
Does Sodium Extra increase FPS?
Not by itself. The frame rate gains come from Sodium. Sodium Extra helps in an indirect way: turning off animations and particles you do not need can reduce rendering work a little. Treat it as a control mod, not a performance mod.
Does Sodium Extra work with Iris Shaders?
Yes. Sodium Extra, Sodium, and Iris Shaders are built to run together, and that combination is one of the most common Fabric setups. Install all three for 26.3 Fabric, add a shader pack through the Iris menu, and the Sodium Extra settings keep working alongside the shaders.
Is there a NeoForge version?
Yes. Version 0.9.5 also has a NeoForge build for Minecraft 26.3 on the official Modrinth page. Use that build if your instance runs NeoForge. Do not put the Fabric file from this page into a NeoForge instance, because the loader will reject it.
Will Sodium Extra work on servers?
Yes, for your own game. Sodium Extra is a client-side mod. It changes only what you see on your screen, so it runs fine on any server that allows client-side mods. Other players do not need it installed.
Do I need to update Sodium Extra when Minecraft updates?
Yes. Like every Fabric mod, Sodium Extra is tied to a Minecraft version. When you move to a newer Minecraft release, wait for a Sodium Extra build marked for that version, update Sodium and Fabric API at the same time, and replace all three files together.
Verdict
Sodium Extra is a small mod with a clear job, and it does that job well. It will not transform your game, and anyone who installs it expecting a frame rate jump will be looking in the wrong place. What it does is give Sodium users the settings menu Sodium never shipped: per-animation switches, per-particle control, fog distance, and detail toggles, all in the menu you already open. If you run Sodium on Fabric and you have ever wished you could turn off one visual effect without losing the rest, install it.
